Primary Metering

Electricity

There are a number of ways in which to obtain data from your primary meters and Enercom can assist you in obtaining this data.

Electricity - Half Hourly Data

There are two ways in which to access your half hourly data:

1.        You can request that the supplier sends the data to you. This is typically sent by email in a usable format that can be imported into energy Management Software.

2.        The second way of gaining access to the data is to install a logger to monitor the pulsed output from the meter. Again, this data can be collected from the loggers and imported into energy management software

Electricity - Non Half Hourly Data

Typically, the non half hourly market consists of manually read meters which are read monthly, quarterly or less often in many cases.  Enercom can arrange for your existing meter to be replaced with a pulse meter and with the installation of a smart logger half hourly electrical data including register reads can be provided. This data can be imported into most energy management software packages.

Gas

Most metering within the gas market is owned by National Grid. Larger supplies have logging devices installed and are read daily. Others are typically read monthly. If the meter has a pulsed output, Enercom can supply a smart logger which can log the pulsed output and transfer this information to energy management software. If the meter has no pulsed output, the meter will need to be replaced, Enercom can facilitate this and the AMR system applied. 

Water

If the meter has a pulsed output, Enercom can supply a smart logger which can log the pulsed output and transfer this information to energy management software.  If the meter has no pulsed output, the meter will need to be replaced or a secondary meter fitted with a pulsed output. Enercom can facilitate this and the AMR System applied.